|
» Turbo/Intercooler |
)
)
“Performance and longevity delivered”
For the Lowest Price Ever $1250
**NEW** ICE III Kit included at no charge **NEW**
Now get the best and most efficient system for your FD at the lowest prices ever.
Our
latest Cool Charge III efficiency enhancements come from Thermal
Management Technology, heat soak and temp rise from low air flow have
both been addressed, Cool Power TBP is used to block I/C and air duct
heat soak with a fan to force feed cool air, this further reduces charge
air temperature gains and cooler temperatures provide more power without
adding boost.Pettit’s Cool Charge III Intercooler System when used with our Cold Air Induction and the new ICE III Kit is the most effective system available for the RX7 FD. More
Cool Charge III features:
· Provides the lowest charge air temperature gains of any system
· Simple DIY install 1-2 hrs* bolts in no cutting or irreversible mods
· High efficiency 12" x 17" core and all aluminum construction
· The only system available that allows for a cold air induction
· Full unrestricted air flow to the radiator (better cooling) and no effect on A/C
· Works with or without air pump
· New ICE III Kit with forced air feed and TBP heat soak blocker, included at no charge
· Works with all twin turbo setups and most singles
· Only four tube connections, mandrel bent for optimum flow from lightweight aluminum and all easily accessible.
· No other systems offer all these features or even come close.
*Notice*Other items needed for use with the Cool Charge III as follows:
A Greddy aluminum elbow, replaces the OEM plastic part.
A battery relocation kit, the CC III uses the original batteries space
*For the best efficiency a cold air induction is necessary as well
(Greddy blow off valve & elbow shown are not included)
Coolcharge III for use with out air pump Reg $1450 Sale $1250
Coolcharge III for use with air pump Reg $1450 Intro sale $1250
ICE III kit included with all I/C orders Reg $139 Intro sale $99
Greddy elbow Reg $132 Intro sale $119
Greddy elbow with BOV flange Reg $178 Intro sale $155
Greddy Type RS BOV Reg $210 Intro sale $199
Battery relocation kit Reg $299 Intro sale $249
)
)
)
Pettit Racing Billet BOV Upgrade
Our new Blow Off Valve kit is quickly becoming
one of our top selling upgrades for the RX7 twin turbo, Our new
design incorporates a full 1" discharge port which helps keep your
turbo's spooled longer between shifts as well as improving boost
response time, it is a vast improvement over the stock part
which only has a small discharge port (5/8"). Another benefit from
our kit is better surge protection and reduced thrust loading which
has proven to lengthen turbo bearing life. Most original vales are
12-15 years old and not working properly, many heat cycles causes
the diaphragm to harden and impair valve operation as well as
response time. The new Pettit BOV is completely CNC machined from
billet aluminum and utilizes dual o-ring’s to seal the piston (No
diaphragm to fail like the stock part) Our kit is a direct
replacement for the stock inefficient plastic Valve and installs in
well under 30 min. Finished in black hard anodizing. Lifetime
Warranty.
Price: 99.00 Reg. $149.00 Free Shipping!!
Item on backorder.
)
Pettit Racing
Silicone Boost Hose Kits
Pettit Racing Silicone Hose Kits provide a simple,
reliable and, effective way to upgrade your old OEM hoses which commonly
deteriorate and fail. These direct replacement silicone hoses
are designed to exceed the extreme need of your rotary powered vehicle
and improve boost response by minimizing hose expansion experienced with
factory hoses.
Our kits are sold in black because the colored hoses are nearly
impossible to keep clean and here at Pettit we like to keep it simple.
Speed and Beauty! All Pettit Silicone Hose Kits come with SS hose clamps
for easy installation.
Price: $99.00 Reg. $149.00 Free Shipping!!
)
Pettit Blueprinted Charge Control Valve Assembly
Our BPCCV is a quick cure for a lazy secondary turbo, these valves often have shaft bushing wear making them sticky and causing the secondary turbo to be lazy and in worst case scenarios even dumping boost off.
Price: $149.99 Free Shipping!!
Item on backorder.
ICE III (Intercooler enhancer)
re-claims horsepower which is normally lost to thermal radiation / poor air flow, this further reduces charge air temperature gain improving performance and longevity without adding more boost
ICE III Kit Includes:
Cool Power
TBP for I/C base and inlet duct10” Electric fan w/ harness and mount kit
Air separator relocation bracket
Instructions and hardware kit
Price reg. $138
!! SALE !! $99 FREE !!
w/ CCIII purchase while supply's last
)
)
)
Are you wasting horsepower? Click here to find out More
Pettit Racing's new Cool Power Thermal Management System is designed to fit most RX7 single turbo kits More, The Cool Power system address the issue of radiant heat expanding the charge before the compression stroke, robbing power from your engine.
The new Pettit Racing Cool Power Kit uses the latest proprietary technology for thermal protection.
The Cool Power Single Turbo System Includes:
-A custom Thermal Barrier Cover for the turbo hot section.
-A stainless shield between the lower intake and the exhaust manifold layered with thermal barrier panel.
-Special .125" Thermal wrap for down pipe and enough extra material to wrap front section of mid pipe.
-Extra Thermal Barrier Panel material is pre cut for several key areas behind the factory passenger foot well shield.
-2 feet of hi temp metal tape, which is used to seal the panel edges.
-3 Stainless hose clamps to secure the wrap
Price: $299.00
Reg. $349.00
)
)
Are you wasting horsepower? Click here to find out More
Pettit Racing's new Cool Power Thermal Management System is designed to fit most Twin Turbo RX7's, The Cool Power system address the issue of radiant heat expanding the charge before the compression stroke, robbing power from your engine.
The new Pettit Racing Cool Power Kit uses the latest proprietary technology for thermal protection.
The Cool Power Twin
Turbo System Includes:
-Special .125" Thermal wrap for down pipe and enough extra material
to wrap front section of mid pipe.
-Extra Thermal Barrier Panel material is pre cut for several key
areas behind the factory passenger foot well shield.
-2 feet of hi temp metal tape, which is used to seal the
panel edges.
-3 Stainless hose clamps to secure the wrap
Price: $99.00
Reg. $149.00
)
)
Cold Power, Another Pettit
Racing first
For your RX7 FD
Twin Turbo
It’s called Cold Power and it will allow your twin turbo FD to perform to its full potential with more performance, efficiency and even added longevity. It doesn’t matter what upgrades you have, what intercooler, what exhaust, whatever, it works with all. More
The Cold Power System Includes:
- 1 Thermal Barrier Panel
pre fitted for the hot side of the Cold Air "V" heat shield
-3ft Metal Thermal Tape to
seal the edges
Price: $24.99
)
Price: $2595.00
)
Pettit
BPHF
Turbo unit
Our blueprinted Hi-Flow Turbo unit is far
superior to stock unmodified units. Hand ported and contour radiused to
improve flow path and efficiency. This turbo unit is better than new.
More
Price:
$1995.00
Pettit
Complete
Twin Turbo Rebuild Kit
Every thing you will need to completely
rebuild your 93-98 RX-7 stock twin turbo unit.
Kit includes:
2x Turbo cartage shaft bearings
2x Carbon seals
2x Thrust bearings
2x "O" rings
2x Piston ring seals
2x Shaft nuts
1x Stud set
1x nut set
1x Set of special hardened flat washers
1x Set of cooling lines
Price: $499.00
)
Price: $195
)
Intro Price: $155 Reg. $178.00
)
Intro Price: $119.00 Reg. $132.00
)
Price: $210.00
)
Price: $211.00
)
Price: $346.00
){kind=spacer}
Turbo Cover
The
Thermal Barrier Cover is designed to fit around the turbo hot section,
made from advanced thermal material, reinforced with inconel wire, and
secured with stainless steel staples, providing a very durable and long
lasting part. Fits most turbos.
Price:
$159.00
)
Heat
Shield
A
stainless steel heat shield, designed for Mazda 13b engines, fits
between the lower intake and the turbo system It’s job is to block
radiant heat absorption into the lower intake manifold reducing charge
air temperatures and increasing horsepower. The shield can also be
layered with thermal barrier panel material, further improving heat
rejection. This design retains an air space between lower intake and
shield, further reducing heat transfer.
Price:
$69.00
)
Thermal Barrier Panel
Sections 2’x 2’
The
Thermal Barrier Panel or “TBP” is made from non-woven thermal insulation
and is created specifically for use in areas where minimum space is
available. Pressure sensitive backing for easy install.
Price: $49.00
)
)
)
Thermal Barrier Wrap
3” wide 20’, 40’ and 100’ foot rolls. The Thermal Barrier Wrap or “TBW” is made of woven thermal insulation, and is used to wrap exhaust tubes, down pipes etc.
$1.75/ft under 100ft. $1.55 over 100ft
Price: $34.99 /20ft
Price: $69.99/40ft
Price: $154.99/100ft
Metal Thermal Tape
Used for sealing the
edges of TB Panels
Price: $.65/ft
Price: $500.00
Price: $13.00
)
)
)
)
)
)
)
)
){kind=link}