)
)
)
Trak Pro Competition Series Coilovers
"A Trak Pro
Suspension will make you
faster"
Designed for the track and still smooth enough for the street, the Series I Competition kit uses a mono tube design which helps keep the shock performance from fading lap after lap. Like Stage III there are 24 dampening adjustments position that provide ample adjustment range for optimizing grip under most conditions and since the adjustments are accessible from the top changes are quick and easy.
Spring Rates: Front 15kg / Rear 12kg
Intro Price: $1,995.00
Reg. $2,499.00 
)
)
)
"A Trak Pro Suspension will make you faster"
Pettit Racings new Trak Pro coil over damper kits deliver high quality and top performance with affordable prices. Three stages were developed specifically for the RX7 FD to suite most driving styles and budgets, from daily driving to track events, auto X, solos or drag racing, Trak Pro kit's will make driving more fun adding confidence to go faster.
Free Shipping!!
Stage I Four wheel kit Intro Price: $1,050.00 Reg. $1,250.00
| Tech & Spec | Adjust position & height |
|
Stage II Four wheel kit Intro Price: $1,299.00 Reg. $1,450.00
| Tech & Spec | Adjust position, height & damping |
|
Stage III Four wheel kit Intro Price: $1,350.00 Reg. $1,499.00
| Tech & Spec | Adjust position, height & damping |
|
)
These new molded upper differential mounts replace the original liquid filled mounts which are prone to failure. Available in 80 and 95 Durometer.
More
Price for Street and Race : $99.00 Reg. $149.00
Street Application
- (80 Durometer)
Race Application
- (95 Durometer)
)
)
)
VOGTLAND Sport Springs:
VOGTLAND sport spring sets made in Germany give your car improved
dynamic handling, better cornering and a dynamic appearance. This
means better appearance with maximum driving comfort in normal
operation and sporty, progressive tuning at the operating limits.
The special driving dynamics are achieved by the innovative spring
design.
Lowering the RX-7 and RX-8 approximately 1” creates a lower center of gravity provides greater handling and increases driving fun.
The reduction of the spring travel demands a
specific spring characteristic, derived from Motorsports. The
VOGTLAND-Compound-Spring consist of two different spring rates: a
starting and an end rate. These are specially calibrated for every
car model balanced and interacting characteristics stand for a
well-balanced driving comfort and more sportive dynamics. Fit's all 93-95 Mazda RX7 FD models.
Price: $199.00
)
This kit is designed for road, track, and drag. Uses the same lower links as the launch kit pro but does not transmit chassis vibrations. Includes both links and all hardware. Easily installs in less than an hour. Fit's all 93-95 Mazda RX7 FD models.
Price: $200.00
)
The hot, hot set up for drag racing as the name implies but was originally designed for road racing to eliminate toe steer and improve handling. The kit includes two lower links, two rear toe links & Delran dif mount bushings. For drag racing wheel hop can cause diff and axle failures by multiplying force from induced rebound (load/unload/load) actions. This modification eliminates induced rebound and rear wheel toe steer caused by the stock lower link’s rubber bushings. Solid Delran replacements minimize compliance that the stock liquid filled diff mounts allow. The toe links are made out of aluminum and anodized black. They use a heim joint with a Teflon insert to completely eliminate any and all flex that the stock rubber bushings allow. Perfect for drag and road racing. Not recommended for street use as the Delran bushings transmit some power train vibration into the chassis. Lower links are manufactured from chrome molly tubing with Teflon insert heim joints. The diff mount bushings are CNC machined from solid Delran. Complete with stainless hardware and everything necessary for a professional installation. Fit's all 93-95 Mazda RX7 FD models. For off-road or racing use only.
Price: $550.00
)
Perfect for both road and drag racing, our kit exactly replaces the stock rubber bushed links completely eliminating compliance. Made from CNC machined black anodized aluminum rods with four Teflon insert heim joints and stainless hardware. Bolts on in about an hour.Fit's all 93-95 Mazda RX7 FD models.
Price: $200.00
)
Stiffens the mounting points for the front sway bar and virtually eliminates deflection of the weak factory bar mounts, improving feed back during spirited driving. Fit's all 93-95 Mazda RX7 FD models.
Price: $100.00
Price: $44.00
Price: $44.00
Price: $81.00
Price: $81.00